ESP32-PICO-D4 – All ESP32 Module components Inside

ESP32-PICO-D4 – All ESP32 Module components Inside

Recently I got the Esp32-PICO-D4 chip. It is a SIP, all esp32 modules components are included in a single ESP32-PICO-D4 chip.

OK Have look at it.

———————————————————————————————-

Buy ESP32-WROVER Module Now, Please visit AnalogLamb.Com

https://www.analoglamb.com/product/esp32-wrover/

Buy ESP-WROVER-KIT Now, Please visit AnalogLamb.Com

https://www.analoglamb.com/product/esp-wrover-kit-esp32-wrover-module/

Buy ALB-WROVER Module, Please visit AnalogLamb.Com

https://www.analoglamb.com/product/alb32-wrover-esp32-module-with-64mb-flash-and-32mb-psram/

More ESP32 Module and Boards, Please visit www.analoglamb.com

Advertisements

ESP32-WROVER Schematic, PCB and Reference Design

ESP32-WROVER Schematic, PCB and Reference Design

Please go here to download ESP32-WROVER Schematic, PCB and Reference Design

https://drive.google.com/open?id=0B7U2LPUrvq9fSHNuQU53a3VDZ3M

Buy ESP32-WROVER Module Now, Please visit AnalogLamb.Com

https://www.analoglamb.com/product/esp32-wrover/

Buy ESP-WROVER-KIT Now, Please visit AnalogLamb.Com

https://www.analoglamb.com/product/esp-wrover-kit-esp32-wrover-module/

Buy ALB-WROVER Module, Please visit AnalogLamb.Com

https://www.analoglamb.com/product/alb32-wrover-esp32-module-with-64mb-flash-and-32mb-psram/

More ESP32 Module and Boards, Please visit www.analoglamb.com

ESP-WROVER-KIT – 4MB PSRAM & Flash with TFT LCD, JTAG, ESP32-WROVER Module – AnalogLamb.Com New Product

Overview of ESP-WROVER-KIT

The ESP-WROVER-KIT is a newly-launched development board built around ESP32. This board is compatible with ESP32 modules, including the ESP-WROOM-32 and ESP32-WROVER. The ESP-WROVER-KIT features support for an LCD and MicroSD card. The I/O pins have been led out from the ESP32 module for easy extension. The board carries an advanced multi-protocol USB bridge (the FTDI FT2232HL), enabling developers to use JTAG directly to debug the ESP32 through the USB interface. The development board makes secondary development easy and cost-effective.

Features

  • ESP32-WROVER module with 4MB PSBRAM, 4MB FLASH
  • 3.2″ TFT LCD display
  • MicroSD card connector
  • Micro USB connector
  • Built-in JTAG and UART interface FTDI FT2232HL
  • RGB LED
  • Two buttons
  • JTAG connector
  • IO 48 pin 0.1″ step connector
  • 5V power supply jack
  • ON/OFF switch

The kit can be powered by either the microUSB port or the external DC power jack. The desired power source must be selected by shorting the proper jumper (shown in the following images). The FT2323 chip will appear as 2 separate serial interfaces when the board is plugged in to your computer. Only one will be usable as the UART for programming the ESP32 on board. When using the IO extender ports, make sure to return the IO signal to ground by using the nearest available ground pin.

To use a feature, be it the in-built LDO, the UART for programming or even the JTAG interface, they must be enabled by shorting the required jumpers. None is enabled by default without using jumpers. The EN and IO0 lines on the board are automatically controlled and thus there is no need to set the board to boot mode before using the flashing tool. However, the board may need to be reset by using the EN button after programming.

 

ESP32 Application Note #02 – How to connect to WiFi AP

Welcome to AnalogLamb WordPress Blog. Today I am glad to share ESP32 Application Notes with you. ESP32 is Espressif new product, which has WiFi and Bluetooth. It is very suitable for IoT Applications. We hope you can learn about more details of ESP32 from the series – ESP32 Application Note.

Buy ESP32 Modules & Boards on AnalogLamb

ALB32-WROVER – 64Mb Flash, 32Mb PSRAM ESP-WROOM-32 Module

Let us begin ESP32 Application Note #02 – How to connect to WiFi AP.

Overview of ESP32 WiFi Programming Model.

Event and Event Handler is a very import concept. Now I would like to explain the scheme of ESP32 WiFi Programming. So that we can understand it clearly. Let us view the Diagram as below.

ESP32 wifi programming model

ESP32 wifi programming model

1), The WiFi driver can be consider as black box, it knows nothing about the high layer code, such as TCPIP stack, application task, event task etc, all it can do is to receive API call from high layer or post event queue to a specified Queue, which is initialized by API esp_wifi_init().

2), The event task is a daemon task, which receives events from WiFi driver or from other subsystem, such as TCPIP stack, event task will call the default callback function on receiving the event. For example,on receiving event SYSTEM_EVENT_STA_CONNECTED, it will call tcpip_adapter_start() to start the DHCP client in it’s default handler.

3), Application can register it’s own event callback function by API esp_event_init, then the application callback function will be called after the default callback. Also, if application doesn’t want to execute the callback in the event task, what it needs to do is to post the related event to application task in the application callback function.

4), The application task (code) generally mixes all these thing together, it calls APIs to init the system/WiFi and handle the events when necessary.

Functions and Data Structure

Data Structure wifi_config_t

wifi_config_t is defined in esp_wifi.h . The details, please check here or as below pic

wifi_config_t

wifi_config_t

wifi_config_t is an union, it includes two struct: wifi_ap_config_t and wifi_sta_config_t. The two structs are used to config AP and STA.

Function esp_wifi_set_config()

The function set configuration of ESP32 STA or AP. It is defined in esp_wifi.c file. The details, please check here. 

There are two parameters: wifi_interface_t ifx – WIFI_IF_STA( station interface) and WIFI_IF_AP( ap interface ). But in esp_wifi_types.h, They are also defined as:

#define WIFI_IF_STA ESP_IF_WIFI_STA
#define WIFI_IF_AP   ESP_IF_WIFI_AP

 

Function esp_wifi_start()

Start WiFi according to current configuration. If mode is WIFI_MODE_STA, it create station control block and start station. If mode is WIFI_MODE_AP, it create soft-AP control block and start soft-AP. If mode is WIFI_MODE_APSTA, it create soft-AP and station control block and start soft-AP and station.

Function esp_wifi_connection()

Connect the ESP32 WiFi station to the AP. This API only impact WIFI_MODE_STA or WIFI_MODE_APSTA mode. If the ESP32 is connected to an AP, call esp_wifi_disconnect to disconnect.

Data Structure tcpip_adatper_ip_info_t

It defines ip information, included ip, netmask, gateway;

Function tcpip_adapter_get_ip_info()

It gets the ip information.

The Example Code

Github

esp32 wifi connection diagram

esp32 wifi connection diagram

The app main function  configure the wifi mode( esp_wifi_set_mode() ), wifi prarmeters storage( esp_wifi_set_storage() ), and event handler( esp_event_loop_init() ), start wifi( esp_wifi_start() ) and set wifi station interface: SSID and Password ( esp_wifi_set_config() ).

After start wifi, an event( SYSTEM_EVENT_STA_START) is occured, then connect to wifi ap( esp_wifi_connection() ). After connection, an event( SYSTEM_EVENT_GOT_IP ) occured, to get ip information( tcpip_adapter_get_ip_info() ). Use esp_wifi_disconnection() to disconnect to wifi ap( SYSTEM_EVENT_STA_DISCONNECTION ).

esp32 wifi connection

esp32 wifi connection

 

Buy ESP32 Modules & Boards on AnalogLamb

ALB32-WROVER – 64Mb Flash, 32Mb PSRAM ESP-WROOM-32 Module

 

ESP32 Application Note #01 – WiFi Scanner

Welcome to AnalogLamb WordPress Blog. Today I am glad to share ESP32 Application Notes with you. ESP32 is Espressif new product, which has WiFi and Bluetooth. It is very suitable for IoT Applications. We hope you can learn about more details of ESP32 from the series – ESP32 Application Note.

Let us begin ESP32 Application Note #01 – WiFi Scanner.

What is the WiFi Scanner?

It can scan the environment to find out the wifi access points SSID,RSSI and Auth Mode. I believe that every smart phone, notebook computer and PAD have this function. Here is an example as below:

WiFi Scanner

ESP32 WiFi Scanner of XiaoMi

How to Make WiFi Scanner with ESP32?

Event and Event Handler

There is an important concept: event. After completing WiFi Scan, An event – SYSTEM_EVENT_SCAN_DONE  is occurred. Then a callback function will be handled. So we usually declare a function to process all events. For example, esp_err_t event_handler(void *ctx, system_event_t *event). And the function esp_event_loop_init() will add event_handler() to the system.

ESP32 WiFI Operation Mode

ESP32 can either be a station in the network, an access point for other devices or both. Here for WIFI scanner, It is in Station Mode.  Function esp_wifi_set_mode() to set up.

Scanning for Access Points

esp_wifi_scan_start() function will start the work. After completed it, the SYSTEM_EVENT_SCAN_DONE is occurred. Then esp_wifi_scan_get_ap_records() function will get results of a WiFi scan which are stored in ESP32 dynamically allocaed storage.

The Example: Github

ESP32 Wifi Scanner

The result of ESP32 Wifi Scanner

Buy ESP32 Modules & Boards in AnalogLamb